1. The customized 80W laser tube, the peak value is 100W, the total reflection inside the tube, the half reflection, the electrode barrel and the amount of gas filling, all reach a balance point with the customized 100W laser power supply, which realizes the soft matching of the laser tube and the laser power supply.
  2. Custom-made Taiwan Dinghan linear guides and sliders can achieve linear motion under high load conditions, with high precision, low noise and durability.
  3. Automatic double lifting platform, funnel type waste collection, upper and lower double exhaust smoke, stable performance, safety, high torque, low noise, low heat generation
  4. The RuiDa board is simple and easy to use, can use U disk data transmission, offline use, save the task seconds after power off, and continue to engrave after power on.
  5. Imported optical lens, high reflectivity, good focusing effect and high engraving accuracy.
  6. Infrared positioning function can be added to facilitate positioning in batch processing.
  7. The laser head blowing flame-retardant device can effectively prevent the material from burning during cutting work. Protect the lens and guide rails.

Parameters

Model3050 i 导轨激光雕刻机
Laser power80W/100W optional
Work size900*600MM
Engraving speed0-1200MM/S
Cutting speed0-600MM/S
Supported softwareDSP control system, Ruida board
Work platformHoneycome platform + knife strip platform
Up and down height30CM
Data transmission interfaceUSB, network cable, offline work independently
voltage220V/ 50HZ/ 60HZ
Applied MaterialsAcrylic<12MM/wood board/leather/rubber and other non-metallic materials