1. 1.The customized 60W laser tube, the peak value is 80W, the total reflection inside the tube, the half reflection, the electrode barrel and the amount of gas filling, all reach a balance point with the customized laser power supply, which realizes the soft matching of the laser tube and the laser power supply.
  2. Standard 1.2mm thick steel plate, the machine structure is more stable, it is not easy to deform and break during long-distance transportation.
  3. 3.The aluminum platform can be adjusted up and down 20cm, and the platform surface has a fixture (for engraving seals) with a honeycomb platform (to protect the aluminum platform during cutting)
  4. Visual key board, easy to use, save seconds after power off, and continue to engrave after power on.
  5. Imported optical lens, high reflectivity, good focusing effect and high engraving accuracy.
  6. Infrared positioning function can be added to facilitate positioning in batch processing.
  7. The laser head blowing flame-retardant device can effectively prevent the material from burning during cutting work. Protect the lens and guide rails.


ModelSG-4060 Laser engraving machine
Laser power60W/80W optional
Work size400*600MM
Engraving speed0-1000MM/S 0-800MM/S
Cutting speed0-100MM/S 0-30MM/S
Supported softwareRuida board/CorelDRAW(M2 board)
Work platformHoneycomb table+ manual lifting aluminum table
Up and down height20CM
Infrared positioningyes
Total weight185KG
Applied MaterialsAcrylic/wood board/leather/rubber and other non-metallic materials
Supported fielsCDR/BMP/PLT/GPEG/DXF/DST etc.